月河路店:杭州市月河路888号
联系电话:0571-87654321
联系人:徐小姐
解放路店:杭州市解放路888号
联系电话:0571-87654322
联系人:王小姐
加盟热线:0571-65887799
 
 
客户点评
 
点评详情
发布于:2022-5-20 13:21:53  访问:1302 次 回复:0 篇
版主管理 | 推荐 | 删除 | 删除并扣分
Are You Good At Did The Head Boss On Ncis La Leave The Show? This Is A Fast Quiz To Search Out Out


Where a seat is provided, the controls, faucets, and shower spray unit shall be positioned on the side wall adjacent to the seat 27 inches (685 mm) most from the facet wall behind the seat or shall be positioned on the back wall reverse the seat 15 inches (380 mm) most, left or proper, of the centerline of the seat. In normal roll-in kind shower compartments, the controls, faucets, and shower spray unit shall be located above the seize bar, however no larger than 48 inches (1220 mm) above the shower flooring. 609.7 Installation. Seize bars shall be put in in any method that provides a gripping floor at the required areas and that does not obstruct the required clear floor area. EXCEPTION: A set shower head located at 48 inches (1220 mm) most above the shower end ground shall be permitted instead of a hand-held spray unit in services that are not medical care services, long-term care facilities, transient lodging guest rooms, or residential dwelling items. In alternate roll-in sort shower compartments, the controls, faucets, and shower spray unit shall be situated above the seize bar, but no higher than 48 inches (1220 mm) above the shower flooring. Grab bars shall adjust to 609. Shall be supplied in accordance with 608.3. Grab bars shall adjust to 609. Shall be offered in accordance with 608.3.3. The place a number of seize bars are used, required horizontal grab bars shall be put in at the identical top above the finish flooring.

















609.5 Floor Hazards.

Bathing amenities shall comply with 609. 1 Basic. Seize bars shall adjust to 609. Shall be offered in accordance with 608.3. Three Seize Bars. Grab bars shall be put in 6 inches (150 mm) most from adjacent partitions. 608.7 Thresholds. Thresholds in roll-in sort shower compartments shall be 1/2 inch (13 mm) high most in accordance with 303. In transfer kind shower compartments, thresholds 1/2 inch (thirteen mm) high most shall be beveled, rounded, or vertical. 608.4 Seats. A folding or non-folding seat shall be provided in switch kind shower compartments. In alternate roll-in type shower compartments, seize bars shall be provided on the back wall and the facet wall farthest from the compartment entry. Seize bars in bathroom facilities. Grab bars with circular cross sections shall have an outside diameter of 1 1/four inches (32 mm) minimum and a pair of inches (51 mm) maximum. Figure 608.2. 608.3 Seize Bars. 609.5 Surface Hazards. Seize bars and any wall or different surfaces adjoining to seize bars shall be free of sharp or abrasive components and shall have rounded edges. Where a seat isn`t provided in normal roll-in sort shower compartments, seize bars shall be supplied on three partitions. 608.2.2.1 Clearance. A 30 inch (760 mm) huge minimal by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment.



















Shall have a 36 inch (915 mm) extensive minimum entry on the face of the shower compartment. Customary roll-in kind shower compartments shall be 30 inches (760 mm) large minimal by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center factors of opposing sides and shall have a 60 inches (1525 mm) vast minimum entry on the face of the shower compartment. Alternate roll-in type shower compartments shall be 36 inches (915 mm) vast and 60 inches (1525 mm) deep minimum clear inside dimensions measured at middle points of opposing sides. 608.3.Three Alternate Roll-In Sort Shower Compartments. 608.2.1 Switch Kind Shower Compartments. 608.5.1 Transfer Kind Shower Compartments. Transfer kind shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the middle factors of opposing sides. In switch type compartments, grab bars shall be supplied across the management wall and again wall to a degree 18 inches (455 mm) from the control wall. The house between the seize bar and projecting objects beneath and at the ends shall be 1 1/2 inches (38 mm) minimum. The place a seat is supplied in an alternate roll-in type shower compartment, it shall be a folding sort, shall be installed on the front wall opposite the back wall, and shall prolong from the adjacent aspect wall to some extent within three inches (seventy five mm) of the compartment entry.



















Clearance of 36 inches (915 mm) broad minimal by 48 inches (1220 mm) long minimum measured from the management wall shall be supplied. A 36 inch (915 mm) huge minimum entry shall be supplied at one finish of the lengthy side of the compartment. 610.2 Bathtub Seats. The highest of bathtub seats shall be 17 inches (430 mm) minimal and 19 inches (485 mm) maximum above the bathroom end flooring. 2. Once the shower head is unfastened, you`ll be able to finish unscrewing it. The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom end flooring. The top of the \"L\" shall be 22 inches (560 mm) minimal and 23 inches most (585 mm) from the principle seat wall. In transfer kind shower compartments, the controls, faucets, and shower spray unit shall be put in on the facet wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm) most above the shower ground and shall be situated on the management wall 15 inches (380 mm) maximum from the centerline of the seat toward the shower opening. 608.8 Shower Enclosures. Enclosures for shower compartments shall not obstruct controls, faucets, and hydrojet shower head review spray units or obstruct switch from wheelchairs onto shower seats.

共0篇回复 每页10篇 页次:1/1
共0篇回复 每页10篇 页次:1/1
我要回复
回复内容
验 证 码
看不清?更换一张
匿名发表 
当前位置
脚注信息
版权所有 Copyright(C)2009-2010 欧亿7美容会所